LEMON Manuals: Even more car manuals for everyone
Home >> Saturn >> 2004 >> Ion 1 Standard >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel System Displays, Gauges And Console >> Repair Instructions >> Bracket Replacement - Instrument Panel (I/P) Center Support >> Installation Procedure

Installation Procedure

  1. Pull back the carpet and position the center support bracket into position.
    2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the center support bracket nuts.

    Tighten:  Tighten the center support bracket nuts to 10 N.m (88 lb in).

    3. Fig 1: View Of Center Support Bracket
    GM877820Courtesy of GENERAL MOTORS CORP.
  3. Install the wiring harness rosebud to the center support bracket.
    4. Fig 2: View Of Wiring Harness Rosebud At Center Support Bracket
    GM877821Courtesy of GENERAL MOTORS CORP.
  4. Install the front floor console. Refer to Console Replacement - Front Floor .
scientia non olet · About LEMON Manuals