LEMON Manuals: Even more car manuals for everyone
Home >> Saturn >> 2004 >> Ion 1 Automatic >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel System Displays, Gauges And Console >> Repair Instructions >> Instrument Panel Cluster (IPC) Replacement >> Removal Procedure

Removal Procedure

  1. Pull out on the accessory trim plate in order to release the retaining fasteners.
    2. Fig 1: Instrument Panel Bezel/Trim Plate
    GM877771Courtesy of GENERAL MOTORS CORP.
  2. Disconnect the accessory trim plate electrical connector(s).
    3. Fig 2: View Of Accessory Trim Plate Electrical Connectors
    GM877774Courtesy of GENERAL MOTORS CORP.
  3. Remove the screw retaining the cluster trim plate to the center trim panel.
  4. Lift up on the cluster trim plate to release the retaining fasteners.
  5. Remove the cluster trim plate.
    6. Fig 3: View Of Cluster Trim Plate
    GM877802Courtesy of GENERAL MOTORS CORP.
  6. Remove the cluster screws
    7. Fig 4: View Of Cluster Screws
    GM877777Courtesy of GENERAL MOTORS CORP.
  7. Pull the cluster out and disconnect the electrical connector.
  8. Remove the cluster from the vehicle.
    9. Fig 5: View Of Cluster
    GM877776Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals