Disc Brake Torque Specifications
WARNING: This page is about a different car, the 2003 Saturn LW300 and 2003 Saturn L300. However, it is still accessible from the selected car via links, so may be relevant.
DISC BRAKE TORQUE SPECIFICATIONS
| Application | Ft. Lbs. (N.m) | ||
|---|---|---|---|
| ABS Control Assembly-To-Bracket Nut | 15 (20) | ||
| Brake Booster-To-Bracket Bolt | 15 (20) | ||
| Brake Hose-To-Caliper (Use NEW Washer) | 30 (40) | ||
| Brake Pedal Bracket-To-Instrument Panel Support Beam Nut | 15 (20) | ||
| Brake Pipe-To-Master Cylinder Nut | 13 (18) | ||
| Brake Pipe-To Proportioning Valve | 12 (16) | ||
| Brake Pipe-To-Rear Caliper | 12 (16) | ||
| Brake Pipe-To-Rear Wheel Cylinder | 12 (16) | ||
| Brake Pipe-To-Master Cylinder | 13 (18) | ||
| Caliper-To-Bracket Guide Pins | 22 (30) | ||
| Caliper-To-Rear Axle Control Arm Bolt | 59 (80) | ||
| Caliper-To-Steering Knuckle Bolt | 70 (95) | ||
| Master Cylinder-To-Brake Booster Nut | 18 (24) | ||
| Rear Caliper-to-Rear Axle Control Arm Bolt | 59 (80) | ||
| Rear Hub Assembly-To-Knuckle Nut | (1) 37 (50) | ||
| Resonator Pipe-To-Exhaust Manifold Pipe | 15 (20) | ||
| Wheel Lug Nut | 92 (125) | ||
| INCH Lbs. (N.m) | |||
| Brake Drum Retaining Fastener | 35 (4) | ||
| Brake Pipe Bracket-To Rear Control Arm | 71 (8) | ||
| Brake Rotor Retaining Screw | 35 (4) | ||
| Caliper Bleeder Valve | 53 (6) | ||
| Parking Brake Lever-To-Floor Pan Nuts | 89 (10) | ||
| Rear Wheel Cylinder Bleeder Valve | 71 (8) | ||
| Wheel Cylinder-To-Backing Plate Bolt | 80 (9) | ||
| Wheel Speed Sensor Bracket-To-Steering Knuckle | 71 (8) | ||
| Wheel Speed Sensor-To-Steering Wheel Sensor Bracket | 71 (8) | ||
|
|||