LEMON Manuals: Even more car manuals for everyone
Home >> Saturn >> 2003 >> L200 Standard >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Disc Brakes & Drum Brakes >> Removal & Installation >> Master Cylinder >> Removal

Master Cylinder: Removal

  1. On models equipped with M/T, disconnect clutch hydraulic feed line from master cylinder reservoir. Plug line to avoid leakage and contamination.
  2. On all models, remove low brake fluid sensor electrical connector.
  3. Remove brake pipe fittings from master cylinder.
  4. Remove master cylinder to brake booster nuts, and remove master cylinder.
scientia non olet · About LEMON Manuals