Connector Identification

NOTE: Refer to illustrations to identify SIR connector terminals. See Fig 1, Fig 2, Fig 3, Fig 4 & Fig 5 .

Fig 1: Identifying Sensing & Diagnostic Module (SDM) Connector Terminals

Courtesy of GENERAL MOTORS CORP.

Fig 2: Identifying Driver-side & Passenger-side Stage 1 & Stage 2 Connector Terminals

Courtesy of GENERAL MOTORS CORP.

Fig 3: Identifying Head Impact Air Bag Module Connector Terminals

Courtesy of GENERAL MOTORS CORP.

Fig 4: Identifying Seat Belt Pretensioner Connector Terminals

Courtesy of GENERAL MOTORS CORP.

Fig 5: Identifying Side Impact Sensor (SIS) Connector Terminals

Courtesy of GENERAL MOTORS CORP.