LEMON Manuals: Even more car manuals for everyone
Home >> Saturn >> 2003 >> Ion 1 Standard >> Repair and Diagnosis (Single Page) >> Body & Frame >> Exterior/Interior Trim >> Interior Trim >> Repair Instructions >> Garnish Molding Replacement - Rear Access Door Blackout >> Removal Procedure

Removal Procedure

  1. Remove the upper garnish molding from the rear access door. Refer to Upper Garnish Molding Replacement - Rear Access Door (Coupe) .
    2. Fig 1: View Of Blackout Garnish Molding (Coupe)
    GM876569Courtesy of GENERAL MOTORS CORP.
  2. Pull the garnish molding to disengage the trim clips.
scientia non olet · About LEMON Manuals