LEMON Manuals: Even more car manuals for everyone
Home >> Saturn >> 2003 >> Ion 1 Standard >> Repair and Diagnosis (Single Page) >> Body & Frame >> Exterior/Interior Trim >> Exterior Trim >> Repair Instructions >> Molding Replacement - Roof Weld Joint Reveal - Rear (Sedan) >> Removal Procedure

Removal Procedure

    Fig 1: View Of Rear Roof Applique (Sedan)
    GM866903Courtesy of GENERAL MOTORS CORP.
  1. Remove the retaining screws from the roof applique.
  2. Slide the roof applique forward to remove the locking tab on the quarter panel from the slot in the applique.
  3. Remove the roof applique.
scientia non olet · About LEMON Manuals