Removal Procedure

Fig 1: View Of Rear Bumper Fascia

Courtesy of GENERAL MOTORS CORP.

Open the rear compartment.
Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
Remove the push-in retainers from the fascia filler.

Fig 2: View Of Rear Wheelhouse Liner

Courtesy of GENERAL MOTORS CORP.

Fig 3: View Of Rear Bumper Fascia

Courtesy of GENERAL MOTORS CORP.

Remove the push-in retainers from the bottom of the fascia to the impact bar.
Remove the fascia ends by pulling the fascia outward from the quarter panel brackets.
Slide the fascia rearward. Remove the fascia from the impact bar.