LEMON Manuals: Even more car manuals for everyone
Home >> Saturn >> 2003 >> Ion 1 Standard >> Repair and Diagnosis (Single Page) >> Body & Frame >> Door Locks >> Door System, Mirror System & Window System >> Repair Instructions >> Upper Garnish Molding Replacement - Rear Access Door (Coupe) >> Removal Procedure

Removal Procedure

    Fig 1: View Of Blackout Garnish Molding (Coupe)
    GM876569Courtesy of GENERAL MOTORS CORP.
  1. Remove the blackout garnish molding by pulling to disengage the trim clips.
    2. Fig 2: View Of Upper Garnish Molding - Rear Access Door (Coupe)
    GM888367Courtesy of GENERAL MOTORS CORP.
  2. Remove the push-in retainer from the upper garnish molding.
  3. Pull the garnish molding to disengage the lower trim clip.
  4. Remove the garnish molding.
scientia non olet · About LEMON Manuals