LEMON Manuals: Even more car manuals for everyone
Home >> Saturn >> 2003 >> Ion 1 Standard >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Seats >> Repair Instructions >> Seat Cushion Replacement - Rear (Sedan) >> Installation Procedure

Installation Procedure

    Fig 1: View Of Rear Seat Cushion (Sedan)
    GM873539Courtesy of GENERAL MOTORS CORP.
  1. Position the rear seat cushion in the vehicle.
  2. Install the seat belt buckles in the slots at the rear of the seat cushion.
    3. IMPORTANT: Ensure that the seat belt buckles are not trapped under the rear seat cushion.
  3. Push rearward and down on the front edge of the seat cushion until the frame engages in the floor pan locking tabs.
scientia non olet · About LEMON Manuals