LEMON Manuals: Even more car manuals for everyone
Home >> Saturn >> 2003 >> Ion 1 Standard >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Seats >> Repair Instructions >> Seat Cushion Outer Trim Panel Replacement - Front Seat (Non-Fold Flat) >> Removal Procedure

Removal Procedure

    Fig 1: View Of Recliner Handle
    GM891296Courtesy of GENERAL MOTORS CORP.
  1. Remove the front seat. Refer to Seat Replacement - Front Bucket .
  2. Remove the recliner handle by pulling firmly on the handle.
    3. Fig 2: View Of Riser Trim Handle
    GM891478Courtesy of GENERAL MOTORS CORP.
  3. For vehicles equipped with 4-way adjustable seats, remove the riser trim handle on the driver side by pulling the handle.
    4. Fig 3: View Of Front Seat Cushion Outer Trim Panel - Non-Fold Flat
    GM891359Courtesy of GENERAL MOTORS CORP.
  4. Remove the screws from the outer trim panel of the front bucket seat cushion.
  5. Remove the outer trim panel.
scientia non olet · About LEMON Manuals