LEMON Manuals: Even more car manuals for everyone
Home >> Saturn >> 2003 >> Ion 1 Standard >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Seats >> Repair Instructions >> Seat Cushion Outer Trim Panel Replacement - Front Seat (Fold Flat) >> Installation Procedure

Installation Procedure

    Fig 1: View Of Front Seat Cushion Outer Trim Panel - Fold Flat
    GM891306Courtesy of GENERAL MOTORS CORP.
  1. Install the outer trim panel to the front bucket seat cushion.
    2. NOTE: Refer to FASTENER NOTICE in Cautions and Notices.
  2. Install the screws to the outer trim panel.

    Tighten:  Tighten the screws to 1 N.m (9 lb in).

    3. Fig 2: View Of Front Seat Back Recliner Trim Panel
    GM891326Courtesy of GENERAL MOTORS CORP.
  3. Install the outer trim panel to the seat back recliner. Refer to Seat Back Recliner Outer Trim Panel Replacement - Front Seat (Fold Flat) .
  4. Install the front seat to the vehicle. Refer to Seat Replacement - Front Bucket .
scientia non olet · About LEMON Manuals