LEMON Manuals: Even more car manuals for everyone
Home >> Saturn >> 2003 >> Ion 1 Standard >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Seats >> Repair Instructions >> Seat Cushion Cover and Pad Replacement - Front (Fold Flat) >> Removal Procedure

Removal Procedure

    Fig 1: View Of Seat Back
    GM875197Courtesy of GENERAL MOTORS CORP.
  1. Remove the front seat from the vehicle. Refer to Seat Replacement - Front Bucket .
  2. Position the seat back to the full upright position.
  3. Remove the outer trim panel from the seat back recliner. Refer to Seat Cushion Outer Trim Panel Replacement - Front Seat (Fold Flat)  or Seat Cushion Outer Trim Panel Replacement - Front Seat (Non-Fold Flat) .
    4. Fig 2: View Of Seat Cushion & Frame
    GM873772Courtesy of GENERAL MOTORS CORP.
  4. Disconnect the J hook retainers from the seat cushion trim cover.
  5. Carefully pull the trim cover out from between the seat back and cushion, and from between the seat cushion and the adjusters.
  6. Remove the trim cover and pad from the seat.
    7. Fig 3: View Of Seat Cushion
    GM873768Courtesy of GENERAL MOTORS CORP.
    NOTE: Use care when disengaging the hook and loop fasteners. The hook end may pull from the seat foam pad, requiring foam pad replacement.
  7. Carefully remove the cover from the pad by disengaging the hook and loop fasteners.
scientia non olet · About LEMON Manuals