LEMON Manuals: Even more car manuals for everyone
Home >> Saturn >> 2003 >> Ion 1 Standard >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Seats >> Repair Instructions >> Seat Cushion Cover and Pad Replacement - Front (Fold Flat) >> Installation Procedure

Installation Procedure

    Fig 1: View Of Seat Cushion
    GM873768Courtesy of GENERAL MOTORS CORP.
  1. Place the trim cover over the pad. Install the cover by pressing on the hook and loop locations.
  2. Install the pad and the trim cover on the seat.
    3. Fig 2: View Of Seat Cushion & Frame
    GM873772Courtesy of GENERAL MOTORS CORP.
  3. Connect the J hook retainers. Ensure that the rear J clip material flap is over the fold-flat cable.
  4. Install the front seat to the vehicle. Refer to Seat Replacement - Front Bucket .
scientia non olet · About LEMON Manuals