LEMON Manuals: Even more car manuals for everyone
Home >> Saturn >> 2003 >> Ion 1 Standard >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Seats >> Repair Instructions >> Seat Cushion Cover & Pad Replacement - Front (Non-Fold Flat) >> Installation Procedure

Installation Procedure

    Fig 1: View Of Seat Cushion
    GM873768Courtesy of GENERAL MOTORS CORP.
  1. Install the seat cushion trim cover on the pad.
  2. Apply pressure over the hook and loop retainers to secure the retainers.
  3. Install the trim and pad on the seat cushion frame.
    4. Fig 2: View Of Seat Cushion & Frame
    GM873772Courtesy of GENERAL MOTORS CORP.
  4. Push the seat cushion trim cover between the cushion and the seat back and the adjusters.
  5. Connect the J-hook retainers.
  6. Install the seat side trim cover. Refer to Seat Cushion Outer Trim Panel Replacement - Front Seat (Fold Flat)  or Seat Cushion Outer Trim Panel Replacement - Front Seat (Non-Fold Flat) .
  7. Install the front seat. Refer to Seat Replacement - Front Bucket .
scientia non olet · About LEMON Manuals