LEMON Manuals: Even more car manuals for everyone
Home >> Saturn >> 2003 >> Ion 1 Standard >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Seats >> Repair Instructions >> Seat Back Cover, Pad & Back Panel Replacement - Rear Split Folding Seat >> Installation Procedure

Installation Procedure

    Fig 1: Exploded View Of Rear Seat Back
    GM875189Courtesy of GENERAL MOTORS CORP.
  1. Place the seat back pad on the seat back panel.
  2. Install the seat back trim cover.
    3. Fig 2: View Of Rear Seat Back Hook & Loop Fasteners
    GM873612Courtesy of GENERAL MOTORS CORP.
  3. Push down on the hook and loop locations to ensure that the fasteners engage.
    4. Fig 3: View Of Rear Push-In Retainers
    GM873617Courtesy of GENERAL MOTORS CORP.
  4. Install the push-in retainers.
    5. Fig 4: View Of Rear J-Hook Retainers
    GM873559Courtesy of GENERAL MOTORS CORP.
  5. Install the upper and lower J-hook retainers.
  6. Install the rear seat back. Refer to Seat Back Replacement - Rear Split Folding .
scientia non olet · About LEMON Manuals