Removal Procedure
- Remove the seat from the vehicle. Refer to Seat Replacement - Front Bucket .
- Remove the screws from the recliner trim panels of the inner and the outer seat back.
- Remove the inner and the outer trim panels.
- Remove the screws from the outer trim panel of the seat cushion.
- Remove the outer trim panel.
- Remove the screw from the inner trim panel of the seat cushion.
- Remove the inner trim panel.
- Remove the seat adjuster handle by squeezing both sides toward the center of the seat.
- Remove the rear J-hook retainer from the seat cushion trim cover.
- Remove the seat cushion frame bolts.
- Remove the seat cushion assembly.
- Remove the outside bolt which attaches the outboard recliner to the adjuster.
- Remove the inside bolt which attaches the outboard recliner to the adjuster.
- Remove the outboard adjuster.
- Remove the seat belt buckle bolt.
- Remove the seat belt buckle.
- Remove the inside bolt which attaches the inboard recliner to the adjuster.
- Remove the inboard adjuster.
IMPORTANT:
Replace all seat adjusters as an assembly. Replace both sides at the same time.