LEMON Manuals: Even more car manuals for everyone
Home >> Saturn >> 2003 >> Ion 1 Standard >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Interior/Exterior Trim >> Interior Trim >> Repair Instructions >> Trim Bezel Replacement - Roof Rail Seat Belt Webbing >> Removal Procedure

Removal Procedure

    Fig 1: View Of Front Seat Belt Anchor Bolt
    GM892688Courtesy of GENERAL MOTORS CORP.
  1. Remove the anchor bolt from the front seat belt.
  2. Remove the seat belt webbing from the front seat head restraint webbing guide.
    3. Fig 2: View Of Rear Access Door Striker Trim Cover (Coupe)
    GM888387Courtesy of GENERAL MOTORS CORP.
  3. Remove the door striker trim by pulling on the trim.
  4. Remove the weatherstrip in the bezel area.
    5. Fig 3: View Of Webbing Trim Bezel
    GM876509Courtesy of GENERAL MOTORS CORP.
  5. Remove the webbing trim bezel outboard by sliding the bezel from the headliner.
  6. Slide the trim bezel off of the seat belt webbing and remove the bezel from the vehicle.
scientia non olet · About LEMON Manuals