LEMON Manuals: Even more car manuals for everyone
Home >> Saturn >> 2003 >> Ion 1 Standard >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Interior/Exterior Trim >> Instrument Panel, Gages, And Console >> Diagnostic Information and Procedures >> Chime Inoperative

Chime Inoperative

Chime Inoperative

Step Action Yes No
Schematic Reference:  Audible Warnings Schematics  
1 Did you perform the Audible Warnings Diagnostic System Check? Go to Step 2  Go to Diagnostic System Check - Audible Warnings 
2
  1. Place the key in the ignition.
  2. Open the driver door.
Does the chime sound?
Go to Step 3  Go to Step 4 
3 Do the courtesy lamps illuminate when the driver's door is opened? Go to Testing for Intermittent Conditions and Poor Connections in Wiring Systems Go to Courtesy Lamps Inoperative in Lighting Systems
4
  1. Connect a scan tool.
  2. Turn the ignition ON, with the engine OFF.
  3. With the scan tool, command the chime ON.
Does the chime sound?
Go to Testing for Intermittent Conditions and Poor Connections in Wiring Systems Go to Step 5 
5 Replace the IPC. Refer to Instrument Panel Cluster (IPC) Replacement .
Did you complete the replacement?
Go to Step 6  -
6 Operate the system in order to verify the repair.
Did you correct the condition?
System OK Go to Step 2