LEMON Manuals: Even more car manuals for everyone
Home >> Saturn >> 2003 >> Ion 1 Standard >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Interior/Exterior Trim >> Exterior Trim >> Repair Instructions >> Grille Applique Molding Replacement - Upper >> Removal Procedure

Removal Procedure

  1. Remove the front grille applique. Refer to Grille Applique Replacement - Upper .
    2. NOTE: Use care when grinding the heat stake material. Improper grinding could damage the applique.
    Fig 1: Locating Heat Stakes
    GM864041Courtesy of GENERAL MOTORS CORP.
  2. Grind the heat stakes from the backside of the chrome molding. Use a 3M Roloc disk, grade 80, or equivalent.
    3. Fig 2: View Of Upper Grille Applique Molding
    GM864040Courtesy of GENERAL MOTORS CORP.
  3. Remove and discard the chrome molding.
scientia non olet · About LEMON Manuals