Equalization Setting Mode (UP0 and UR9 ONLY)
Radio equalization settings are customized for each vehicle design. The vehicle wiring to the radio determines proper equalization settings. If the "EQ" setting does not reflect the setting listed here, check for proper terminal connection of circuit 43 (IGN) at the 24-way radio connector. Refer to Enter On Board Diagnostic Mode procedure prior to referencing this information. The EQ settings are:
- EQ:00 - Any Saturn with amplifier (RPO WBM)
- EQ:02 - Saturn ION without amplifier
- EQ:03 - Saturn VUE without amplifier