Removal Procedure
Courtesy of GENERAL MOTORS CORP.
- Pull out on the accessory trim plate in order to release the retaining fasteners.
Courtesy of GENERAL MOTORS CORP.
- Disconnect the accessory trim plate electrical connector(s).
Courtesy of GENERAL MOTORS CORP.
- Remove the screw retaining the cluster trim plate to the center trim panel.
- Lift up on the cluster trim plate to release the retaining fasteners.
- Remove the cluster trim plate.
Courtesy of GENERAL MOTORS CORP.
- Remove the cluster screws
Courtesy of GENERAL MOTORS CORP.
- Pull the cluster out and disconnect the electrical connector.
- Remove the cluster from the vehicle.