LEMON Manuals: Even more car manuals for everyone
Home >> Saturn >> 2003 >> Ion 1 Automatic >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel, Gages, And Console >> Repair Instructions >> Bracket Replacement - Instrument Panel (I/P) Center Support >> Installation Procedure

Installation Procedure

    Fig 1: View Of Center Support Bracket
    GM877820Courtesy of GENERAL MOTORS CORP.
  1. Pull back the carpet and position the center support bracket into position.
    2. NOTE: Refer to FASTENER NOTICE in Cautions and Notices.
  2. Install the center support bracket nuts.

    Tighten:  Tighten the center support bracket nuts to 10 N.m (88 lb in).

    3. Fig 2: View Of Wiring Harness Center Support Bracket
    GM877821Courtesy of GENERAL MOTORS CORP.
  3. Install the wiring harness rosebud to the center support bracket.
  4. Install the front floor console. Refer to Console Replacement - Front Floor .
scientia non olet · About LEMON Manuals