LEMON Manuals: Even more car manuals for everyone
Home >> Saturn >> 2002 >> SC2 Automatic, MP6 >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel, Gages, And Console -- "S" Series >> Repair Instructions >> Instrument Panel Upper Trim Plate Replacement >> Installation Procedure

Installation Procedure

Fig 1: Instrument Panel Upper Trim
GM866425Courtesy of GENERAL MOTORS CORP.
    NOTE: Be careful not to damage the VIN plate when removing or replacing the upper trim panel.
    IMPORTANT: Be sure the upper trim panel seal is correctly seated on the forward edge before installing the upper trim panel.
  1. Ensure the hook-and-loop fastener attachments on the upper trim panel are correctly inserted.
  2. Position the upper trim panel on the retainer assembly.
  3. Align the tabs on tne sides of the upper trim panel with the openings in the windshield garnish molding.
  4. Align the clips and the clip location.
  5. Firmly snap in the clips at the clip locations.
    6. NOTE: Refer to Fastener Notice in Cautions and Notices.
  6. Install the fasteners on the underside of the upper trim panel on the passenger side of the vehicle.

    Tighten:  Tighten the I/P upper trim panel fasteners to 6 N.m (53 lb in).

scientia non olet · About LEMON Manuals