Disassembly Procedure
Courtesy of GENERAL MOTORS CORP.
- Remove the screws attaching the inside compartment to the I/P compartment door.
- Push the I/P door pins from inside of the compartment to the outside of the I/P compartment door.
- Remove the I/P compartment from the I/P compartment door.
- Remove the I/P compartment retainer bushing.
- Pry between the I/P compartment retainer bushing and the I/P compartment door with a small screwdriver.
- Remove the I/P compartment latch.
- Remove the screws attaching the latch to the I/P compartment door.
- Remove the rod from the retainers on the handle assembly.
- Remove the latch and rod assembly from the I/P compartment door.
Courtesy of GENERAL MOTORS CORP.
- Remove the U-clip from handle assembly.
- Remove the handle assembly from the I/P compartment door.