LEMON Manuals: Even more car manuals for everyone
Home >> Saturn >> 2002 >> SC2 Automatic, MP6 >> Repair and Diagnosis (Single Page) >> Body & Frame >> Exterior Body Panels >> Bumpers -- "S" Series >> Repair Instructions >> Rear Bumper Impact Bar Replacement (Coupe) >> Installation

Rear Bumper Impact Bar Replacement (Coupe): Installation

    IMPORTANT: If reusing the bumper impact bar after a rear-end collision, inspect the bar for damage. If the bar is not torn or cracked and retains its shape, it can be reused.
  1. Position the impact bar to rear end structure.
    2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the attaching nuts and bolts.

    Tighten:  Tighten the bolts to 25 N.m (19 lb ft).

  3. Install the fascia. Refer to Rear Bumper Fascia Replacement (Coupe)  or Rear Bumper Fascia Replacement (Sedan)  or Rear Bumper Fascia Replacement (Wagon) .
scientia non olet · About LEMON Manuals