LEMON Manuals: Even more car manuals for everyone
Home >> Saturn >> 2002 >> SC2 Automatic, MP6 >> Repair and Diagnosis (Single Page) >> Body & Frame >> Exterior Body Panels >> Bumpers -- "S" Series >> Repair Instructions >> Rear Bumper Fascia Replacement (Sedan) >> Installation

Rear Bumper Fascia Replacement (Sedan): Installation

    Fig 1: Fascia End (Key Slots)
    GM864397Courtesy of GENERAL MOTORS CORP.
  1. Install the fascia over the bumper sub-assembly. Engage the fascia ends (key slots) over the shoulder bolts extending down from the quarter panel and pushing the fascia forward to lock the fascia to the quarter panels.
  2. Install the plastic retainers in wheelhouse liner to fascia ends.
  3. Install the plastic retainers, rear fascia bottom to the fascia support brackets.
  4. Align the bumper filler and install the plastic retainers.
  5. Close the rear compartment lid.
scientia non olet · About LEMON Manuals