LEMON Manuals: Even more car manuals for everyone
Home >> Saturn >> 2002 >> SC2 Automatic, MP6 >> Repair and Diagnosis (Single Page) >> Body & Frame >> Exterior Body Panels >> Bumpers -- "S" Series >> Repair Instructions >> Rear Bumper Fascia Replacement (Coupe) >> Installation Procedure

Installation Procedure

    Fig 1: Fascia, Wheeliner Nuts, Fascia Brackets And Bumper Filler
    GM866303Courtesy of GENERAL MOTORS CORP.
  1. If installing a new rear fascia, transfer the wheeliner nuts, fascia brackets and bumper filler.
  2. Install the fascia over the bumper impact bar. Engage the fascia ends (key slots) over the shoulder bolts extending down from the quarter panel and pushing the fascia forward to lock the fascia to the quarter panels.
  3. Install the plastic retainers in wheelhouse liner to the fascia ends.
  4. Install the plastic retainers, rear fascia bottom to the fascia support brackets.
  5. Install the plastic retainers to the rear bumper filler.
  6. Close the rear compartment lid.
scientia non olet · About LEMON Manuals