LEMON Manuals: Even more car manuals for everyone
Home >> Saturn >> 2002 >> SC2 Automatic, MP6 >> Repair and Diagnosis (Single Page) >> Body & Frame >> Exterior Body Panels >> Bumpers -- "S" Series >> Repair Instructions >> Front License Plate Bracket Replacement (Sedan/Wagon) >> Installation Procedure

Installation Procedure

  1. Position the license plate bracket to the front fascia and install the fasteners.
    2. IMPORTANT: If this is a first time installation, drill 6 mm (0.24 in) hole at dimple on centerline of the lower fascia. Position the bracket to the fascia and install the bottom fastener. Drill two top holes and install the fasteners.
  2. Install the license plate to the bracket with screws.
scientia non olet · About LEMON Manuals