LEMON Manuals: Even more car manuals for everyone
Home >> Saturn >> 2002 >> SC2 Automatic, MP6 >> Repair and Diagnosis (Single Page) >> Body & Frame >> Exterior Body Panels >> Body Rear End -- "S" Series >> Repair Instructions >> Rear Compartment Lid Outer Panel (Sedan) >> Installation Procedure

Installation Procedure

  1. Connect the license plate bulb sockets to the license plate lamps.
  2. Position the outer panel on the compartment so that the top edge of the outer panel locks onto the lip on the compartment lid.
  3. Loosely install the attachment bolts.
    4. IMPORTANT: If using existing fasteners, ensure that the sealing feature is adequate. If questionable, apply a body caulking compound or its equivalent to ensure against water intrusion.
  4. Inspect the panel alignment to the surrounding components and align as required.
  5. Tighten the attachment bolts.
scientia non olet · About LEMON Manuals