Removal Procedure
Courtesy of GENERAL MOTORS CORP.
- Open the compartment lid and remove the compartment side wall trim left side.
- Open the fuel filler door.
- Remove the latch retainer nut, releasing the fuel filler door release cable.
- Remove the rear wheelhouse screws and plastic retainers on the left half of the rear fascia and the lower left half of the rear fascia.
- From inside the rear compartment, disconnect the latch grommet from the structure at the rear wall of the rear compartment, and pull the latch into the rear compartment.
- Place the tip of a flat screwdriver under the tabs locking end of the fuel filler door release latch to release the cable.
- Remove the latch and the inner hardware.