LEMON Manuals: Even more car manuals for everyone
Home >> Saturn >> 2002 >> SC2 Automatic, MP6 >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Seats -- "S" Series >> Repair Instructions >> Rear Seat Cushion Replacement (Sedan/Wagon) >> Installation Procedure

Installation Procedure

  1. Position the seat cushion rear edge onto the rear compartment ramps. Route the seat belt buckles through the rear cushion slots assuring that the buckles are not twisted or stuck beneath the seat cushion.
  2. Align the seat frame wire with the compartment lower retainers and push rearward, while pushing downward, to secure the seat frame wire into the retainers. Pull up on the cushion to verify that it is secure.
scientia non olet · About LEMON Manuals