LEMON Manuals: Even more car manuals for everyone
Home >> Saturn >> 2002 >> SC2 Automatic, MP6 >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Interior/Exterior Trim >> Interior Trim -- "S" Series >> Repair Instructions >> Windshield Garnish Molding Replacement (1st Design Sedan/Wagon) >> Removal Procedure

Removal Procedure

    Fig 1: Right Front Assist Strap Plate
    GM867261Courtesy of GENERAL MOTORS CORP.
  1. Remove the instrument panel upper trim panel. Refer to Instrument Panel Upper Trim Plate Replacement in Instrument Panel, Gages, and Console.
  2. Unsnap the shoulder belt fastener cover and remove the shoulder belt attaching fastener.
  3. Remove the shoulder belt adjuster knob by unsnapping the locking clip with an awl.
  4. Starting at the upper rear section of the molding, pull firmly at the clip locations to disengage the molding from the vehicle.