LEMON Manuals: Even more car manuals for everyone
Home >> Saturn >> 2002 >> SC1 Automatic >> Repair and Diagnosis (Single Page) >> Electrical >> Wiring Diagrams >> Wiring Systems -- "S" Series (General Information) >> Diagnostic Information and Procedures >> Connector Repairs >> Push-To-Seat Connectors

Push-To-Seat Connectors

Fig 1: Inserting Terminal Lock Release Tool
GM862384Courtesy of GENERAL MOTORS CORP.

Terminal Removal 

IMPORTANT: Cut leads with terminals are available from Saturn Service Parts for terminal replacement.
  1. Remove any terminal position assurance (TPA) retainers.
  2. Insert the terminal lock release tool into the front of the connector cavity. Pull the wires and terminal out of the back of the connector.
scientia non olet · About LEMON Manuals