LEMON Manuals: Even more car manuals for everyone
Home >> Saturn >> 2002 >> SC1 Automatic >> Repair and Diagnosis (Single Page) >> Body & Frame >> Sun Roof/T-Top/Convertible Top >> Roof -- "S" Series >> Repair Instructions >> Roof Front Drip Molding Replacement - Right Side >> Removal Procedure

Removal Procedure

    Fig 1: Windshield Frame Filler Panel
    GM867124Courtesy of GENERAL MOTORS CORP.
  1. Remove the windshield frame filler panel by removing the screw, then sliding the panel upward.
  2. Remove the retaining screws from the roof outer drip rail.
  3. Remove the drip rail.
  4. Carefully remove the rear end of the drip rail behind the rear quarter panel.
  5. Remove the front end of the drip rail from behind the front fender.
scientia non olet · About LEMON Manuals