LEMON Manuals: Even more car manuals for everyone
Home >> Saturn >> 2002 >> SC1 Automatic >> Repair and Diagnosis (Single Page) >> Body & Frame >> Exterior Body Panels >> Bumpers -- "S" Series >> Repair Instructions >> Front License Plate Bracket Replacement (Coupe) >> Installation Procedure

Installation Procedure

  1. Position the license plate bracket to the front fascia and install the fasteners.
    2. IMPORTANT: If this is a first time installation, drill 6 mm (0.24 in) hole at dimple on centerline of the lower fascia. Position the bracket to the fascia and install the bottom rivet. Drill two top holes, using the bracket as a template, and install the rivets.
  2. Install license plate to bracket with screws.
scientia non olet · About LEMON Manuals