LEMON Manuals: Even more car manuals for everyone
Home >> Saturn >> 2002 >> SC1 Automatic >> Repair and Diagnosis (Single Page) >> Body & Frame >> Exterior Body Panels >> Bumpers -- "S" Series >> Repair Instructions >> Fascia Support Replacement >> Removal Procedure

Removal Procedure

    Fig 1: Fascia Support-To-Bumper Impact Bar Attaching Nuts
    GM866692Courtesy of GENERAL MOTORS CORP.
  1. Remove the front fascia. Refer to Front Bumper Fascia Replacement (Sedan/Wagon)  or Front Bumper Fascia Replacement (Coupe) .
  2. Remove the fascia support-to-bumper impact bar attaching nuts.
  3. Slide the fascia support off of the studs.
scientia non olet · About LEMON Manuals