LEMON Manuals: Even more car manuals for everyone
Home >> Saturn >> 2002 >> SC1 Automatic >> Repair and Diagnosis (Single Page) >> Body & Frame >> Exterior Body Panels >> Body Rear End -- "S" Series >> Repair Instructions >> Fuel Filler Door Release Latch Replacement >> Installation Procedure

Installation Procedure

    Fig 1: Fuel Filler Door Release Latch
    GM865664Courtesy of GENERAL MOTORS CORP.
  1. Install the latch and the inner hardware.
  2. Place the latch through the hole in the rear wall of the rear compartment. Push the grommet into place.
  3. Guide the latch around the rear quarter bracket and into the hole in the filler opening. Turn the latch 90 degrees to lock into place.
  4. Tighten the nut.
  5. Ensure the proper function of the fuel filler door release handle, the latch, and the door.
  6. Install the plastic fasteners to the rear fascia and install the bolts to the wheelhouse.
  7. Reposition the rear compartment carpet and close the rear compartment lid.
scientia non olet · About LEMON Manuals