LEMON Manuals: Even more car manuals for everyone
Home >> Saturn >> 2002 >> SC1 Automatic >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Interior/Illumination Lights >> Lighting Systems -- "S" Series >> Repair Instructions >> Tail Lamp Replacement (Wagon) >> Installation Procedure

Installation Procedure

    Fig 1: Tail Lamp (Wagon)
    GM867241Courtesy of GENERAL MOTORS CORP.
  1. Connect the harness assembly to the tail lamp assembly.
  2. Align the tail lamp to the quarter panel and push gently forward until the tab fits into the quarter panel.
  3. NOTE: Refer to Fastener Notice in Cautions and Notices.
  4. Tighten the fasteners.

    Tighten:  Tighten the tail lamp assembly (Sedan/Wagon) to 3.5 N.m (31 lb in).

  5. Close the rear lift gate.