Removal Procedure
Courtesy of GENERAL MOTORS CORP.
- Remove the liftgate window upper molding retainers.
- Remove the liftgate window upper molding by pulling at the clip locations to disengage the clips.
Courtesy of GENERAL MOTORS CORP.
- Remove the liftgate side window molding by pulling at the clip locations to disengage the clips.
Courtesy of GENERAL MOTORS CORP.
- Remove the fasteners from the lower end of the liftgate inner lower panel assembly.
- Remove the liftgate rubber bumpers.
- Remove the liftgate inner lower panel by pulling at the clip locations to disengage the clips.