LEMON Manuals: Even more car manuals for everyone
Home >> Saturn >> 2002 >> SC1 Automatic >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Exterior Lights >> Lighting Systems -- "S" Series >> Repair Instructions >> High Mount Stop Lamp Replacement (Wagon) >> Installation Procedure

Installation Procedure

    Fig 1: High Mount Stop Lamp (Wagon)
    GM865251Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to Fastener Notice in Cautions and Notices.
  1. Install the center high mount stop lamp with the screws.

    Tighten:  Tighten the center high-mount stop lamp (Sedan/Wagon) to 2.5 N.m (19 lb in).

  2. Connect the electrical harness.
  3. Install the upper garnish molding with the plastic fasteners.
  4. Close the lift gate.