Removal Procedure

Fig 1: Upper Extension Trim Panel

Courtesy of GENERAL MOTORS CORP.

NOTE: Place protective covers on body to prevent paint damage.

NOTE: To protect paint from damage, tape quarter panel along/under quarter glass encapsulation using a thick tape.

Fig 2: Rear Side Door Opening Frame Upper Rear Blackout Filler

Courtesy of GENERAL MOTORS CORP.

Disengage the clips for the rear side door opening frame upper rear blackout filler and remove.

Fig 3: Lower Trim Panel

Courtesy of GENERAL MOTORS CORP.

Remove the rear side door lower trim panel. Refer to Rear Side Door Trim Panel Replacement (Coupe) or Rear Side Door Trim Panel Replacement (Sedan/Wagon) .
Remove the retaining bolts from the window.

Fig 4: Window Retaining Bolts

Courtesy of GENERAL MOTORS CORP.

Remove the window from the door by applying outward pressure to the inside of the window. Use a heat gun around the window edges to soften the Butyl-tape if necessary.