Removal Procedure
- Remove the door trim panel. Refer to Front Side Door Trim Panel Replacement .
- Remove the door window. Refer to Front Side Door Window Replacement (Sedan/Window) or Front Side Door Window Replacement (Coupe) .
- Partially remove the inner sealing strip (belt seal) at the rear of the door.
- Partially remove the window secondary weatherstrip at the rear of the door.
- Remove the window guide. Refer to Front Side Door Window Weatherstrip Replacement .
- From the belt opening, using a long screwdriver, pry the rods from the door latch.
- Disconnect the power lock actuator wiring harness, if equipped.
- Disconnect the inside handle rod and lock rod from the rod retainer clip on the inside door structure.
- Remove the screws and remove the door latch.