Vacuum Booster: Removal
- On models equipped with ABS, the ABS controller must be removed. See ANTI-LOCK BRAKES - SATURN "L" SERIES. article.
- Remove brake pipes from master cylinder.
- Disconnect low brake fluid switch electrical connector.
- Remove master cylinder-to-brake booster nuts. Remove master cylinder from vehicle.
- Disconnect vacuum check valve and hose from booster.
- Remove left lower instrument panel.
- Remove booster push rod retainer and push rod from brake pedal.
- Remove brake booster-to-brake booster bracket attachment bolts.
- Remove top bolt by going in through HVAC filter access panel.
- From under hood, remove booster.