Lens/Mask Assembly: Notes
CAUTION:
Failure to use the anti-static mat SA9502Z properly may result in damage or latent damage to the cluster electronics.
NOTE:
Tools Required: Anti-Static Mat (SA9502Z).
NOTE:
If the lens/mask gets dirty, it can be cleaned by following the procedures in the owner's handbook. If a dial face gets dirty, it can be cleaned by using glass cleaner and a lint free rag.
NOTE:
Do not touch or bump the pointers of the gages. If the pointers are moved from their positions, the calibration of the gage will be affected and the gage will no longer be accurate and must be replaced.