Cigar Lighter/Auxiliary Power: Removal
- Remove 20 amp. lighter fuse (auxiliary fuse) located in the underhood fuse block.
- Obtain Cigar Lighter Removal Tool J42059.
Courtesy of GENERAL MOTORS CORP.
- Remove cigar lighter element (lift tether cap).
Courtesy of GENERAL MOTORS CORP.
- Locate two square holes in receptacle.
Courtesy of GENERAL MOTORS CORP.
- Hold removal tool at a 30 degree angle as you insert it into the receptacle.
Courtesy of GENERAL MOTORS CORP.
- Position one side of the removal tool in one hole then the other hole.
Courtesy of GENERAL MOTORS CORP.
- Pull receptacle straight out.
- Disconnect connector.