LEMON Manuals: Even more car manuals for everyone
Home >> Saturn >> 2002 >> L100 >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Disc Brakes & Drum Brakes >> Removal & Installation >> Rear Disc Brake Pads & Caliper >> Installation

Rear Disc Brake Pads & Caliper: Installation

  1. Install caliper assembly to rear axle control arm and tighten to specification. See TORQUE SPECIFICATIONS  . Install brake pipe to caliper assembly and tighten fastener to specification.
  2. Install brake pads into caliper. Apply a small amount of silicone to retaining pins, install retaining spring and drive pins from inside outward.
  3. Bleed brakes. See BLEEDING BRAKE SYSTEM  . Install wheel. Tighten to specification. See TORQUE SPECIFICATIONS  . Lower vehicle from hoist.