LEMON Manuals: Even more car manuals for everyone
Home >> Saturn >> 2002 >> L100 >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel, Gauges & Console >> Removal & Installation >> Glove Compartment Bin >> Removal

Glove Compartment Bin: Removal

  1. Open glove compartment door.
  2. Remove glove compartment lamp assembly by pulling on lamp plunger.
  3. Disconnect glove compartment lamp wiring harness from glove compartment lamp.
    4. Fig 1: Disconnecting Glove Compartment Lamp Wiring Harness
    G01833525Courtesy of GENERAL MOTORS CORP.
  4. Remove right side I/P lower closeout panel (hush panel) retainers.
    5. Fig 2: Removing Right Side I/P Lower Closeout Panel (Hush Panel) Retainers
    G01833526Courtesy of GENERAL MOTORS CORP.
  5. Pull closeout panel (hush panel) rearward to detach from forward retainers.
  6. Remove right side heater outlet assembly retainer and remove outlet.
    7. Fig 3: Removing Right Side Heater Outlet Assembly Retainer
    G01833527Courtesy of GENERAL MOTORS CORP.
  7. Remove glove compartment door.
    8. Fig 4: Removing Glove Compartment Door
    G01833528Courtesy of GENERAL MOTORS CORP.
  8. Remove glove compartment bin fasteners.
    9. Fig 5: Removing Glove Compartment Bin Fasteners
    G01833529Courtesy of GENERAL MOTORS CORP.
  9. Slowly remove glove compartment bin tilting bin downward to expose BCM residing on top of glove box.
    10. Fig 6: Removing Glove Compartment Bin
    G01833530Courtesy of GENERAL MOTORS CORP.
  10. Remove BCM module from glove compartment by sliding module out of attaching slots.
  11. Remove glove compartment bin.
scientia non olet · About LEMON Manuals