LEMON Manuals: Even more car manuals for everyone
Home >> Saturn >> 2001 >> SW2 Automatic >> Repair and Diagnosis (Single Page) >> Engine Mechanical >> Mechanical >> Induction System >> Removal & Installation >> Vacuum Harness Assembly - DOHC (Ll0) >> Removal

Vacuum Harness Assembly - DOHC (Ll0): Removal

  1. Remove air intake tube and air box cover.
  2. Remove accelerator control cable bracket attaching bolts.
  3. Disconnect vacuum harness from EVAP canister purge solenoid.
    NOTE: Inspect the vacuum harness connectors for deterioration. Replace the vacuum harness if damaged.
  4. Remove vacuum harness from throttle body by unclipping the two tangs and lifting it upward.
scientia non olet · About LEMON Manuals