LEMON Manuals: Even more car manuals for everyone
Home >> Saturn >> 2001 >> SW2 Automatic >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Steering Column Switches >> Steering Column & Switches >> Removal & Installation >> Ignition Switch >> Removal & Installation

Removal & Installation

  1. Set front wheels in straight-ahead position. Before proceeding, disable air bag system. See appropriate AIR BAG RESTRAINT SYSTEMS article. Remove Data Link Connector (DLC) from steering column filler panel. Remove steering column filler panel mounting screws and remove hood release cable from steering column filler panel. Remove steering column covers.
  2. Insert key into ignition switch. Place ignition switch in ACC position. Depress locking button on top of ignition switch housing, and remove ignition switch tumbler from ignition switch housing. Disconnect electrical connectors from ignition switch. Remove 2 shear bolts and remove ignition switch from steering column.
  3. Install ignition switch tumbler into ignition switch housing. To complete installation, reverse removal procedure.
scientia non olet · About LEMON Manuals